Shimadzu Electronic Printer Instruction Manual EP-80 Read the instruction manual thoroughly before you use the prod
1. Introduction CAUTION Avoid locations where the balance will be exposed to any of the following. Prohibitions This could cause accidents or poor
2. Packing List and Component Names2. Packing List and Component Names 2.1 Packing list Unpack and verify that the following standard packed items (
3. Installation 3. Installation 3.1 Installation Site Caution For safe and proper operation, avoid sites where EP-80 is exposed to the following:
3. Installation Caution Observe the following instructions about handling batteries. 1. Load batteries observing the polarity. 2. Do not mix
3. Installation 3.3 Installation 3.3.1 Connecting to power (when using AC adapter) Verify power switch is off. Connect AC adapter to EP-80. Conn
3. Installation 3.3.3 Loading printer paper Connect AC adapter or load batteries. Remove printer paper cover. (How to remove printer paper cove
3. Installation Keep pressing [FEED] key while inserting the printer paper end into the slot of the printer mechanism as shown in the figure. Feed th
3. Installation3.4 Connecting the Balance Cable connection Turn OFF the balance and EP-80. Firmly attach connection cable to the I/O connectors of
4. Functions and Operation 4. Functions and Operation 4.1 Key Switches Key Functions [TARE] Tares the balance (Zeros the display) [PRINT] Receives
4. Functions and OperationThe results of statistic calculation are printed out in the following order. Order in print out Statistics Symbol in pri
4. Functions and Operation 4.4 Auto Print Mode Auto print function prints out the weighed result automatically as a sample is placed on the balance
5. Communication and Other Settings5. Communication and Other Settings In EP-80 electronic printer, five settings including three communication sett
5. Communication and Other Settings 5.2 Settings There are 8 DIP switches numbered from 1 to 8. 5 items including 3 communication settings can be
5. Communication and Other Settings5.2.4 English / Japanese Switches between English and Japanese for statistic calculation print out. DIP switch n
6. Maintenance 6. Maintenance 6.1 Refilling Printer Paper The red lines marked on the printer paper indicate the paper is running short. Replace with
7. Troubleshooting7. Troubleshooting Check the following points before calling for servicing. Symptom Cause (→ remedy) The power lamp does not lig
20 8. Parts List 8. Parts List Standard Items Item Part No. Remarks AC adapter 321-62688 INPUT:AC 100-240V Connection cable 321-62686-01 60 cm
9. Specifications9. Specifications Print method Impact dot Inking Ink ribbon Print format 24 digits / line (5 × 7 dot matrix) Printing speed 2.7
10. Dimensions 10. Dimensions (mm) 22
Declaration Of Conformity Shimadzu Corporation declares that the following product: EP-80 Electronic Printer conforms to the following directi
ContentsDeclaration Of Conformity ... 1 1. Introduction .
Contents ...20 8. Parts List ...
1. Introduction1. Introduction Shimadzu Electronic Printer EP-80 is designed to be used with Shimadzu Electronic Balances. It is easy to operate and
2 1. Introduction and product names that appear in this manual are trademarks or registered trademarks of the companies concerned. Note that ™ and ®
1. IntroductionSafety Precautions To ensure that you use the balance safely and correctly, read the following precautions carefully and observe them
Comments to this Manuals