Shimadzu ELB300 Instruction Manual download pdf (Page 15)

7. Menu Selection

Various functions, including selecting different measurement speeds and setting of the piece counting

mode, are available on the ELB-series balance. Selection of these functions is referred to as “Menu

Selection”.

Procedure (1)

(2)

(3)

(4)

(5)

Press the [MODE] key.

The currently set conditions are displayed in symbols.

(Example)

Auto Power Off function activated *

Zero tracking activated *

Stability detection width: Large

Normal Response Mode

(Items with “*” illuminates

when set to on.)

The display changes in the order shown in the table on page 11 by pressing the

[MODE] key.

To select a condition or a mode, press the [TARE] key while the condition or the

mode is displayed.

When a condition or a mode is selected,

“SEt” is displayed, and then it reverts to the

weight display. (This does not occur when

calibration, piece counting, or percentage

conversion is selected.)

CAUTION! The internal values of the balance are being revised while “SEt”

is displayed. Do not turn off the power while “SEt” is displayed.

After displaying “SG” (“Unit kg” for the ELB12K), the balance reverts to the weight

display.

- Press the [ON/OFF(BREAK)] key to stop menu selection.

- Set the response mode to “Normal” (A-2) in ordinary cases.

Set the response mode to “Fast” (A-1) when it is necessary to reduce the time

required for measurements. (Be acknowledged that measurement accuracy

may be sacrificed).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 34 35

No comments

Shimadzu ELB300 Instruction Manual Page 15