Shimadzu ATX124 Instruction Manual Page 130
- Page / 152
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
130
12
TROUBLESHOOTING
Symptom Probable Cause(s) Countermeasure See:
Nothing is displayed on
the display panel.
The power cable is
disconnected.
The main switch on the
distribution panel is off.
The power supply voltage is
wrong.
Check the power supply
and voltage and make the
connections correctly.
Page 138
The display doesn't
change when a sample
(item to be weighed) is
placed on the pan.
The pan has been displaced.
Set the pan correctly on the
balance.
Page 24
The display uctuates
and (the stability
mark) does not appear
readily.
The balance has been installed
in an unstable environment.
Eliminate the effects of
vibration and air movement.
Install the balance on a robust
platform.
Page 22
Check if the object for
weighing sticks out of the pan.
Place the object so it does not
sticks out too much of the pan.
-
Check if anything other
than the object for weighing
touches the pan.
Avoid anything other than the
object for weighing touches
the pan.
-
The glass door of the
windbreak is open.
Close all the glass doors before
reading the display.
-
The weighing result is
not accurate.
Span calibration has not been
performed.
Perform span calibration. Page 52
Is the display at zero before
weighing?
Press to set
the display at zero before
weighing.
Page 32
The units that you
want to use are not
displayed.
The units that you want to use
have not been set.
Ser the units that you want to
use for
Page 77
Menu operations are
not possible.
Menu operation is locked. Release the menu lock. Page 46
The WindowsDirect
communication function
cannot be used.
Page 110
Calibration (I.GAL) by
using internal weight
takes longer than usual.
If END is displayed after waiting for a while, it does not mean any
abnormalities; use as usual.
Page 48
What to Do If….
For details, see
"Troubleshooting the WindowsDirect Communication Function".
- 321-78001C 1
- MAR. 2013 1
- Requests 2
- Notices 2
- Introduction 3
- Example: 4
- Example page 5
- What You Can Do 6
- Calibration 7
- Printing / 7
- Miscellaneous 7
- Safety Precautions 8
- Precautions on Use 9
- 21 CFR Part 11 10
- Shimadzu CLASS-Balance Agent 10
- Shimadzu WindowsDirect 10
- Two-way Communication 10
- Action for Environment (WEEE) 11
- Table of Contents 12
- 4 CALIBRATION 48 13
- 7 SETTING UNITS 76 14
- 9 COMPARATOR FUNCTION 96 14
- 11 MAINTENANCE 124 15
- 12 TROUBLESHOOTING 130 15
- WITH PERIPHERAL DEVICES 100 15
- 13 FOR YOUR INFORMATION 132 16
- BEFORE WEIGHING 18
- Operation Keys 19
- Display Panel 20
- Numeric value area 21
- Installation 22
- ATX/ATY Series 23
- Installing the Components 24
- Turning the Power ON 26
- Warming Up 27
- Performing Span Calibration 28
- 2!0!0.0!0!0!0 29
- USING THE BALANCE 32
- Shut the glass door fully 33
- Avoid doing the following: 33
- Outputting Weight 34
- Readings 34
- ! ! ! ! !0.0 35
- ! ! 0.0!0!0 35
- STAND STAND 35
- Select the measurement 36
- 10D, and conrm at 10D 36
- ! !P!O!I!NT ! !P!O!I!NT 37
- !P!E!R!I!O!D !P!E!R!I!O!D 37
- ! !C!O!M!M!A ! !C!O!M!M!A 37
- Conrm and return to the 38
- Ending Weighing 39
- MENU SETTINGS 40
- !0.0!0!0!0 41
- Basic Menu 42
- Operations 42
- Entering Numerical 43
- Convenient 45
- Functions for Menu 45
- 1 through 3 again 47
- CALIBRATION 48
- ! ! !E.C!A!L 49
- Automatic 50
- (ATX only) 50
- Announcement of 51
- (ATY only) 51
- Span Calibration 52
- Calibration of the 56
- Internal Weight 56
- (ATX Only) 56
- CAL3 ~ CAL0 are performed 58
- Leaving a Record 59
- Change the setting 60
- FUNCTIONS RELATING TO TARING 62
- Zero Tracking 63
- Function 63
- Auto Zero Function 64
- Auto Tare Function 66
- Zero / Tare Timing 67
- Selecting the weighing mode 68
- Selecting the 69
- Weighing Mode 69
- ! ! !B!A!N!D ! ! !B!A!N!D 72
- ! ! ! !1!0!D ! ! ! !1!0!D 73
- ! ! ! !1!0!D 73
- This opens the main menu 74
- SETTING UNITS 76
- Selecting Units to 77
- Setting 78
- User-Specied 78
- Minimum Indication 79
- APPLICATION FUNCTION MODE 80
- ! ! ! ! P!C!S ! ! ! ! P!C!S 81
- !S!A!M!P!L!E 82
- ! ! ! ! ! !5 ! ! ! ! ! !5 82
- ! ! ! ! ! !5 84
- ! ! ! ! !1!0 ! ! ! ! !1!0 84
- ! !-!-!-! ! ! !-!-!-! ! 84
- P!E!R!C!E!N!TP!E!R!C!E!N!T 86
- What to do if… 87
- APPLICATION FUNCTION MODE 88
- ! !1!0!0.0!0 89
- Formulation 90
- Outputting Component Numbers 93
- Outputting the Gross Weight 94
- COMPARATOR FUNCTION 96
- ! !T!G.V!A!L ! !T!G.V!A!L 97
- ! !L!M.V!A!L ! !L!M.V!A!L 97
- 1!0!5.0!0!0!0 97
- !C!H!E!C!K.W 98
- ! !H!I.L!I!M ! !H!I.L!I!M 98
- ! !L!O.L!I!M ! !L!O.L!I!M 98
- !U!N!D.R!N!G !U!N!D.R!N!G 99
- !O!V!R.R!N!G !O!V!R.R!N!G 99
- CONNECTION AND COMMUNICATION 100
- WITH PERIPHERAL DEVICES 100
- Continued on next page 101
- ! !0.0!0!0!0 102
- !S!E!Q.P!R!N 102
- 6. Steps 7 103
- ! ! !W!I!N! 105
- ! !S!E!T! 106
- Making the settings at the PC 107
- ! !O!F!F 109
- Connecting to a PC 111
- (RS-232C) 111
- Data Format 112
- Command Codes 114
- Echo-back commands 115
- Command list 115
- Application weighing 116
- Other functions 116
- System-related commands 116
- Connecting 118
- Communication 119
- Settings 119
- Standard Settings (MODE) 120
- User-Specied Settings 120
- ! ! ! !B!P!S ! ! ! !B!P!S 121
- !P!A!R!I!T!Y !P!A!R!I!T!Y 121
- ! ! !S!T!O!P ! ! !S!T!O!P 121
- H!A!N!D.S!H!KH!A!N!D.S!H!K 121
- ! !D.F!O!R!M ! !D.F!O!R!M 122
- ! !D!E!L!I!M ! !D!E!L!I!M 122
- Output Timing 123
- Change Function 123
- MAINTENANCE 124
- Removing the Glass Door 125
- Inspection 126
- Periodic Inspections 127
- About Weights 128
- 62 g 60 g (50 g + 10 g) 129
- 82 g 80 g (50g + 20g +10g) 129
- 124 g 100 g 129
- 220 g 200 g 129
- TROUBLESHOOTING 130
- Responding to 131
- Messages 131
- FOR YOUR INFORMATION 132
- Setting the Startup Display 133
- Changing the 134
- Password 134
- !G!L!P.O!U!T 135
- ! !S!E!T! ! 136
- Setting a Balance ID 137
- Specications 138
- Maintenance Parts 140
- List of Functions 142
- That Can Be Used in 142
- Combination 142
- Menu Map 143
- Main Menu 144
- Hardware 145
- Continuous output function 145
- Zero or negative value 145
- Unit Setting Menu 146
- Calibration Menu 146
- Zero / Tare Menu 146
Related products and manuals for Kitchen scales Shimadzu ATX124
(352 pages)
Kitchen scales Shimadzu BL3200L User Manual
(101 pages)
(101 pages)
(1 pages)© 2020, manymanuals.com. All rights reserved. | 1.494 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals