Shimadzu ATX124 Instruction Manual Page 64
- Page / 152
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
64
5
FUNCTIONS RELATING TO TARING
When the auto zero function is set, any drift of the zero point that occurs as a result of material left on
the pan after weighing is automatically compensated for so that zero is displayed.
Note that the auto zero function cannot be used in combination with formulation.
*
Not applicable to a veried balance as a legal measuring instrument.
1
Press for about
3 seconds in the weighing mode.
This opens the zero / taring menu.
2
Select the auto zero function.
[A.ZERO]
What is the current situation? What do you want to do?
Stability
Mark
Auto Zero
Function
To set or Update… To Cancel…
Lit
ID is ON
Press and go to step 3.
Press and go to
step 4.
Unlit
ID is OFF
Press and go to
step 3.
Go to step 4.
3
Enter the value for the range for
automatic compensation to the
zero point (auto zero range).
(Enter the zero range value.) [SET]
^
"Entering Numerical Values", page 43
If there is anything with a weight lower than or
equal to the auto zero range value left on the pan
after weighing the sample, it will automatically
be compensated for and the zero point will be
established when (the stability mark) lights
up.
! !A.Z!E!R!O
Check the presence or absence of
the stability mark.
! !A.Z!E!R!O
Check the presence or absence of
the stability mark.
! !0.0!0!0!0
! !S!E!T! !
! !A.Z!E!R!O
/
/
/
/
/
/
/
/
/
/
/
/
/
/
When ON is set the stability mark is lit.
! !0.0!0!0!0
! !S!E!T! !
! !A.Z!E!R!O
/
/
/
/
/
/
/
/
/
/
/
/
/
/
When ON is set the stability mark is lit.
Auto Zero Function
- 321-78001C 1
- MAR. 2013 1
- Requests 2
- Notices 2
- Introduction 3
- Example: 4
- Example page 5
- What You Can Do 6
- Calibration 7
- Printing / 7
- Miscellaneous 7
- Safety Precautions 8
- Precautions on Use 9
- 21 CFR Part 11 10
- Shimadzu CLASS-Balance Agent 10
- Shimadzu WindowsDirect 10
- Two-way Communication 10
- Action for Environment (WEEE) 11
- Table of Contents 12
- 4 CALIBRATION 48 13
- 7 SETTING UNITS 76 14
- 9 COMPARATOR FUNCTION 96 14
- 11 MAINTENANCE 124 15
- 12 TROUBLESHOOTING 130 15
- WITH PERIPHERAL DEVICES 100 15
- 13 FOR YOUR INFORMATION 132 16
- BEFORE WEIGHING 18
- Operation Keys 19
- Display Panel 20
- Numeric value area 21
- Installation 22
- ATX/ATY Series 23
- Installing the Components 24
- Turning the Power ON 26
- Warming Up 27
- Performing Span Calibration 28
- 2!0!0.0!0!0!0 29
- USING THE BALANCE 32
- Shut the glass door fully 33
- Avoid doing the following: 33
- Outputting Weight 34
- Readings 34
- ! ! ! ! !0.0 35
- ! ! 0.0!0!0 35
- STAND STAND 35
- Select the measurement 36
- 10D, and conrm at 10D 36
- ! !P!O!I!NT ! !P!O!I!NT 37
- !P!E!R!I!O!D !P!E!R!I!O!D 37
- ! !C!O!M!M!A ! !C!O!M!M!A 37
- Conrm and return to the 38
- Ending Weighing 39
- MENU SETTINGS 40
- !0.0!0!0!0 41
- Basic Menu 42
- Operations 42
- Entering Numerical 43
- Convenient 45
- Functions for Menu 45
- 1 through 3 again 47
- CALIBRATION 48
- ! ! !E.C!A!L 49
- Automatic 50
- (ATX only) 50
- Announcement of 51
- (ATY only) 51
- Span Calibration 52
- Calibration of the 56
- Internal Weight 56
- (ATX Only) 56
- CAL3 ~ CAL0 are performed 58
- Leaving a Record 59
- Change the setting 60
- FUNCTIONS RELATING TO TARING 62
- Zero Tracking 63
- Function 63
- Auto Zero Function 64
- Auto Tare Function 66
- Zero / Tare Timing 67
- Selecting the weighing mode 68
- Selecting the 69
- Weighing Mode 69
- ! ! !B!A!N!D ! ! !B!A!N!D 72
- ! ! ! !1!0!D ! ! ! !1!0!D 73
- ! ! ! !1!0!D 73
- This opens the main menu 74
- SETTING UNITS 76
- Selecting Units to 77
- Setting 78
- User-Specied 78
- Minimum Indication 79
- APPLICATION FUNCTION MODE 80
- ! ! ! ! P!C!S ! ! ! ! P!C!S 81
- !S!A!M!P!L!E 82
- ! ! ! ! ! !5 ! ! ! ! ! !5 82
- ! ! ! ! ! !5 84
- ! ! ! ! !1!0 ! ! ! ! !1!0 84
- ! !-!-!-! ! ! !-!-!-! ! 84
- P!E!R!C!E!N!TP!E!R!C!E!N!T 86
- What to do if… 87
- APPLICATION FUNCTION MODE 88
- ! !1!0!0.0!0 89
- Formulation 90
- Outputting Component Numbers 93
- Outputting the Gross Weight 94
- COMPARATOR FUNCTION 96
- ! !T!G.V!A!L ! !T!G.V!A!L 97
- ! !L!M.V!A!L ! !L!M.V!A!L 97
- 1!0!5.0!0!0!0 97
- !C!H!E!C!K.W 98
- ! !H!I.L!I!M ! !H!I.L!I!M 98
- ! !L!O.L!I!M ! !L!O.L!I!M 98
- !U!N!D.R!N!G !U!N!D.R!N!G 99
- !O!V!R.R!N!G !O!V!R.R!N!G 99
- CONNECTION AND COMMUNICATION 100
- WITH PERIPHERAL DEVICES 100
- Continued on next page 101
- ! !0.0!0!0!0 102
- !S!E!Q.P!R!N 102
- 6. Steps 7 103
- ! ! !W!I!N! 105
- ! !S!E!T! 106
- Making the settings at the PC 107
- ! !O!F!F 109
- Connecting to a PC 111
- (RS-232C) 111
- Data Format 112
- Command Codes 114
- Echo-back commands 115
- Command list 115
- Application weighing 116
- Other functions 116
- System-related commands 116
- Connecting 118
- Communication 119
- Settings 119
- Standard Settings (MODE) 120
- User-Specied Settings 120
- ! ! ! !B!P!S ! ! ! !B!P!S 121
- !P!A!R!I!T!Y !P!A!R!I!T!Y 121
- ! ! !S!T!O!P ! ! !S!T!O!P 121
- H!A!N!D.S!H!KH!A!N!D.S!H!K 121
- ! !D.F!O!R!M ! !D.F!O!R!M 122
- ! !D!E!L!I!M ! !D!E!L!I!M 122
- Output Timing 123
- Change Function 123
- MAINTENANCE 124
- Removing the Glass Door 125
- Inspection 126
- Periodic Inspections 127
- About Weights 128
- 62 g 60 g (50 g + 10 g) 129
- 82 g 80 g (50g + 20g +10g) 129
- 124 g 100 g 129
- 220 g 200 g 129
- TROUBLESHOOTING 130
- Responding to 131
- Messages 131
- FOR YOUR INFORMATION 132
- Setting the Startup Display 133
- Changing the 134
- Password 134
- !G!L!P.O!U!T 135
- ! !S!E!T! ! 136
- Setting a Balance ID 137
- Specications 138
- Maintenance Parts 140
- List of Functions 142
- That Can Be Used in 142
- Combination 142
- Menu Map 143
- Main Menu 144
- Hardware 145
- Continuous output function 145
- Zero or negative value 145
- Unit Setting Menu 146
- Calibration Menu 146
- Zero / Tare Menu 146
Related products and manuals for Kitchen scales Shimadzu ATX124
(352 pages)
Kitchen scales Shimadzu BL3200L User Manual
(101 pages)
(101 pages)
(1 pages)© 2020, manymanuals.com. All rights reserved. | 0.117 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals